Manual Materials Handling Assessment (NIOSH Lifting Equation, ACGIH TLVs, Snook Tables)

Description

Score a lifting, lowering, pushing, pulling or carrying task against biomechanical and psychophysical limits to judge low-back injury risk and justify redesign of the task or product.

Three complementary tools for physical load. The 1981 NIOSH guide set an action limit tied to roughly 3,400 N of spinal compression and a maximum permissible limit about three times higher; the 1993 revised equation computes a Recommended Weight Limit by discounting a 23 kg load constant through horizontal, vertical, distance, asymmetry, frequency and coupling multipliers, and a Lifting Index (load divided by RWL) above 1.0 signals increased risk. ACGIH threshold limit values give weight limits for twelve lift-origin zones by frequency and duration. The psychophysical approach has workers adjust a load until it feels acceptable for an 8-hour shift; Snook and Ciriello's tables give, by sex, the percentage of the population that finds a given lift, push, pull or carry acceptable, and are the usual tool for pushing and pulling. Scoring before and after redesign turns ergonomics into a quantified business case. Validation studies find the revised equation conservative.

Attributes

Loss type
Unmigrated
Effort
Days

Steps

  1. Identify problem jobs from injury records or discomfort surveys and ask the people doing them which tasks cause trouble.
  2. For each lift or lower, measure at origin and destination: horizontal distance from mid-ankles to the load centre, vertical height, asymmetry angle, frequency, hand-object coupling quality and vertical travel distance.
  3. Compute RWL = 23 kg x HM x VM x DM x AM x FM x CM and the Lifting Index = load / RWL; flag any LI above 1.0.
  4. Cross-check against the ACGIH TLV for the lift-origin zone and frequency.
  5. For pushing, pulling and carrying, and as a check on lifts, look up the Snook (Liberty Mutual) table for the task parameters to get the percentage of male and female workers who find it acceptable.
  6. Redesign (shorten horizontal reach, raise origin height, add handles, reduce frequency, add lifting aids) and re-score to show the before-and-after improvement.

Sources

  • Handbook of Human Factors and Ergonomics (Salvendy & Karwowski, 2021)

Also known as

  • NIOSH Lifting Equation
  • Revised NIOSH Lifting Equation (RNLE)
  • Recommended Weight Limit and Lifting Index
  • ACGIH lifting threshold limit values
  • Snook tables
  • Liberty Mutual MMH tables
  • Psychophysical lifting tables

Categories

  • Accessibility
  • Human Factors & Error