Description
Record a device with two microphones to measure delays between a touch, its haptic pulse and its sound, so feedback either fuses into one event or is deliberately separated.
When sound, vibration and visual events that should be simultaneous drift apart, users must work to match them and the interaction feels broken, as with a coin sound arriving late in a game. Events within a millisecond or two are perceived as one. The bench method attaches one microphone to the device body to pick up the touch bump and haptic motor, and a second over the speaker; an audio editor then shows the touch, haptic pulse and sound on the waveforms so intervals can be measured against targets. Where fusion cannot be achieved, the parts should be decorrelated so each has a distinct transient. Testing is repeated under heavy processor load, alongside checks that every state plays its mapped sound and haptic, rapid-press stress tests and overlapping-sound tests.
Attributes
- Discipline
- Human Factors & Error
- Loss type
- Siloed
- Stage
- Design, Evaluation
- Data
- Quantitative
- Effort
- Hours
Steps
- Attach one microphone to the device with rubber bands, near the haptic motor if known.
- Rest the device on thick foam or cloth with the speaker facing up, and place a second microphone on a stand over the speaker.
- Perform each interaction to be tested several times.
- In audio-editing software, identify the touch bump, the haptic pulse and the sound on the waveforms.
- Measure touch-to-haptic and touch-to-sound intervals and compare with target synchronisation times; aim for fusion or clear separation.
- Repeat with the processor under heavy load, and run rapid button-press and overlapping-sound stress tests.
- After any change, retest every sound and haptic mapping.
Sources
- Designing with Sound (Case & Day, 2018)
Also known as
- Two-microphone latency test
- Sound-vibration sync test
- Multimodal feedback timing test
Categories
- Accessibility
- Human Factors & Error